|

SEALECTION 500- is an
open cell semi-rigid spray-applied polyurethane foam
insulation system which is made up of million of
microscopic cells that simultaneously insulate and
air-seal.
SEALECTION® 500 has been
specifically designed to make homes more energy efficient,
comfortable, quiet and less dusty.
SEALECTION® 500 is
applied as a liquid which expands into a semi-rigid mass;
it automatically "SEALS" off those drafty areas such as
baseboards, headers, sill plates, around windows, doors,
electrical outlets, pipes, etc. It also minimizes
uncontrolled air leakage throughout the building envelope
(wall, ceilings,...), thereby reducing energy
losses.
R-Value (3.81) does not
diminish over time.
2X4 cavity R13
2X6 cavity R19
BENEFITS FROM SEALECTION
500
- Energy Efficient
Homes - heating and cooling costs can be reduced by as
much as 50%.
- A Reduction of
Heating and Air Conditioning tonnage by as much as 40%
without the loss of efficiency or comfort.
- Draft Free
Environment - sealing of cracks, joints, etc..., will
prevent uncontrolled movement of air through the wall
assemblies.
- Quiet Homes - the
open cells and the semi-rigid polyurethane mass will
absorb and reduce the transmission of
sound.
- Dust Free - homes
insulated with SEALECTION® 500 show a remarkable
reduction of dust accumulation.
- Improved Indoor Air
Quality.
- Stable Insulation -
not subject to structural deterioration or
decomposition.
- Comfort throughout
the Home.
SEALECTION®
500
SEALECTION® 500 is an
insulation breakthrough! SEALECTION® 500 is a
two-component, open-celled, spray-applied, semi-rigid
polyurethane foam system. This product is a fully
water-blown foam system having a very low in-place density.
SEALECTION® 500 expands within seconds to 120 times its
volume to fill every nook and cranny providing superior
energy efficiency and improved indoor air quality by
eliminating air movement through walls. SEALECTION® 500
reduces airborne noise and dust making it the healthy
choice for those who suffer from allergies, asthma or
chemical sensitivity. SEALECTION® 500 is the smart choice
for healthy living.
BUILDING CODE
REQUIREMENTS
SEALECTION® 500 is a
non-toxic spray foam which has undergone extensive testing
and complies with the intent of the U.S. building code
requirements for foam plastic insulation. SEALECTION® 500
meets the off gassing requirements of CGSB 51.23-92 for new
residential construction. SEALECTION® 500 has been approved
by the EcoLogo (formerly Environmental Choice) Program of
Canada and is listed as a Certified Green
Product.
CHEMICAL
COMPONENTS
Side A- Isocyanate
Side B- Resin
Blend
PHYSICAL
PROPERTIES
Density (ASTM D 1622)
0.45-0.5 lb/ft³
Thermal Performance (ASTM
C 518) R 3.81ft².h°F/BTU
Surface Burning Chara.
(6”) Class I
Flame Spread (ASTM E 84)
21
Smoke Development (ASTM E
84) 216
Water Vapor Transmission
6.6 Perms @ 3.5”
(Class III Vapor Retarder
@ normal installed thickness) 4.2 Perms @
5.5”
Sound Transmission Class
(ASTM E 90 & E 413 (1999)) 49-51
Noise Reduction
Coefficient (ASTM C 423) 75
Air Leakage (2006 IRC
requirements)
3.5” @ 75Pa (25 mph wind)
0.001 L/s*m²
5.5” @ 75Pa (25 mph wind)
0.001 L/s*m²
Tensile Strength 5.6
lbs/in²
Compressive Strength 0.7
psi
Always check local codes
before using this product. It is highly suggested that in
all applications the foam be protected by either of the
following: drywall, metal, cements, or other constructive
facing.
|